如何清洗橡胶输送带？

使用一段时间后，橡胶输送带表面的污垢需要清洗。这样做一方面是为了保证输送带的使用寿命，另一方面是为了保证输送带的工作耗能池。那么如何清洗橡胶输送带呢?输送带厂家为您详细介绍。

　　After using for a period of time, the dirt on the surface of rubber conveyor belt needs to be cleaned. On the one hand, it is to ensure the service life of the conveyor belt, on the other hand, it is to ensure the working energy consumption pool of the conveyor belt. Then how to clean the rubber conveyor belt? Jinao conveyor belt manufacturers for your detailed introduction.

　　1. 清洗橡胶输送带时，先关闭蒸汽阀，根据张紧装置的位置调整压力。

　　1. When cleaning the rubber conveyor belt, first close the steam valve and adjust the pressure according to the position of the tensioner.

　　2. 使用塑料包装机电设备。

　　2. Use plastic packaging machinery and electrical equipment.

　　3、连接橡胶输送带，将洗衣机连接到220v交流。

　　3. Connect the rubber conveyor belt and connect the washing machine to 220V AC.

　　4. 把橡胶输送带弄湿。

　　4. Wet the rubber conveyor belt.

　　5. 将清洗液与水按1:10的比例混合，搅拌均匀。

　　5. Mix the cleaning liquid and water in a ratio of 1:10 and mix evenly.

　　6. 用枪将清洗液均匀喷在大皮带上，注意大皮带的加强边，不要使用太多动量，以免伤害大皮带，枪应扫一次，不要反复冲洗。

　　6. Spray the cleaning liquid evenly on the belt with gun. Pay attention to the strengthening edge of the belt. Don't use too much momentum to avoid damaging the belt. The gun should be swept once and not rinsed repeatedly.

　　7、用水清洗，这个时候要小心，因为一般的橡胶输送带很难清洗，所以我们要格外注意仔细清洗，把它晾干。

　　7. Wash with water. Be careful at this time, because the rubber conveyor belt is very difficult to clean, so we should pay special attention to carefully cleaning and drying it.

以上就是擎川EVERLA给大家分享的“ 如何清洗橡胶输送带？”相关信息，希望通过介绍，能对大家有所帮助，擎川输送带厂家15年专注于食品输送带、PVC输送带、PU输送带、PU同步带、特氟龙输送带、尼龙片基带研制生产，为食品、医药、日化领域提供一站式输送带解决方案。如果您有输送带的采购需求，欢迎来电咨询400-9688-278